Air Intake Baffle for Harbor Freight 40lb Blast Cabinet

If you are reversing the air flow in your HF blast cabinet then you can use this to redirect the air down lower in your cabinet.  Also works if you are not reversing the flow as it forces the air to be pulled out from a lower location.

Utilizes two of the existing holes and requires 4 additional holes to be drilled and 2 additional M4x10 nuts, botls and washers to mount.

I printed it in PETG.  .2 layer height, 4 perimeters, 15% infill.  Does require supports.

I did have to print this at work on an Ultimaker S5 as it is a large print.  Print volume of 330x240x300.  I had to rotate it about 30 degrees on the print bed to get it to fit.