Sim Racing Handbrake V1

All the files that are required are downloadable and ready to print I made adjustments how the parts are printed and don't need  to be changed but you can still change them if you want to use less filament.

Also when assembling use superglue on some bolts so that they don't come off. I am working on a design with nuts to prevent using gluing parts together. Also the grips must be glued on the upper handle part. Also the Table mount is designed to fit a 20mm table plate so you may need to adjust it.

The Parts are Printed in Black PETG and the layer height is already set.

The required hardware is listed here:

Electrical Things:

1.  -Arduino Pro Micro 
2.  -Slidable-potentiometer (L x B x H) 35 x 9.5 x 6.5 mm    F2031N  20mm travel
3.  -Some cables 
4.  -An USB Micro cable 

Mechanical Hardware:

1. -M5x10mm                                  x 10
2. -M5x30mm                                 x3
3. -M8x20mm                                 x 4
4. -M8x25mm                                 x 6
5. -M8x65mm                                 x 3
6. -M8x60mm                                 x 1
7. -1.2x9x45mm Spring                 x1 You can choose what spring you want to use
8.  -M8 lock nut                              x6
9. -M8 Nut                                       x4

Little hint when assembled use some electric tape on the Grips for a better feel.

I used this YouTube video as a guide how to wire it and how to set up the code: