Small Hopper with Bellows for Eureka Mignon

Design
This 60mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact) allows, surprise, simple single dosing. The interesting thing is that, compared to other single dosing mods, a transparent element made of polycarbonate is integrated into the hopper, which makes it possible to watch the beans getting crushed. An anti-popcorn device is installed to prevent them from escaping their fate and to ensure a more uniform grinding result. To get the last bit of grist out of the mill's innards, a flexible bellows is mounted on the hopper to blow out the grinder after the grinding process. This, together with an inclined position of the mill, guarantees maximum low retention, i.e. the same output as input.

If you'd like to buy a finished product visit my newly made store :)

Details
 

• Timeless design in matte black
• 60mm hopper diameter to grind large quantities of beans
• Minimise retention
• Original screw for fixing can be used
• Parts are only plugged in for easy cleaning, but can be glued in place if required
• Compatible with Eureka Mignon Manuale, Specialita, Silenzio

You'll need a 60/54mm clear tube.

Materials
All parts, except the transparent tube and the bellow are made of PLA, Polylactide. It is a widely used material for 3D printing. It is easy to work with and gives great printing results. It should NOT be put in the dishwasher, as it starts to lose its structural integrity at moderately high temperatures (from about 60°C). To clean it, it should be lightly wiped with lukewarm water. The transparent section can be easily cleaned with Windex.
But wait, is 3D printing really food safe? Good question, Jim. I'll try to answer that here.
 

Compatibility
These extensions have been designed and tested with the Eureka Mignon Manule/Facile. Normally, these extensions should fit any Eureka Mignon grinder that has a small, single-colour dial on the right-hand side. So the Specialita, Manuale, Silenzio, Facile, Filtro and Puristico. The grinders with a larger wheel, XL, Perfetto, Libra, will most likely not fit. On Printables are the 3D files to check the fit.
We are working quickly to test and add new models! For further suggestions or questions, don't hesitate to drop us a line!