Rapberry Pi 3 Sting Case

This enclosure is for a Raspberry Pi 3 or any Model B.

The enclosure is well-crafted with a tight fit, such that the Raspberry Pi fits snugly inside it. Although it can be fastened with four self-tapping screws, this may not be necessary as the tight fit alone is sufficient to keep everything in place.

I used the following printer settings are:

Material: PLA
Layer Height: 0.28
Infill Density: 25%
Support: None

The enclosure has been designed to require no support material during the 3D printing process, making it an easy and straightforward project to print.