Gridfinity Wire Spool Holder for NTE/MicroCenter branded wire spools

I have a bunch of these NTE 24 AWG wire spools and thought I'd make a Gridfinity holder for them. I chose to do single spools because sometimes I only need one or two at a time for a project.

This is a single part and you just need to snap the spool in to place with a very light amount of force. They come out just as easily, and spin quite freely. THere's a hole on the front to pull the wire through so you can just pull it.

I recommend pairing this with a 2x2 weighted baseplate.