March 28, 2023
Description
This is an adaptor that clips around the cardboard spool from filaments.ca to work in the BambuLab X1C AMS system.
When looking around online I did find some similar models however I didn't find one that actually fit onto the spools without falling off.
I added some small tabs around the edges to keep it in place. It should work for cardboard spools with an outer diameter of approximately 198.5mm.
No hardware required, print 2 per spool. They fit on the X1C/P1P build plate.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Erlich Doerksen
