Rear panel with chamber fan for Bambu Lab P1P

Updates:
2023.03.29: In the ams version the wall was too thin in one place, this has been fixed.

If you don't want to modify the original panel, print your own :)

What you need?

• This fantastic chamber fan duct (designed by suit):
  https://www.printables.com/model/427552-chamber-fan-duct-for-bambu-lab-p1p
• 92mm fan
• 92mm fan grill
• M3 x OD4.6 x H3.0 heated inserts and M3x5mm screws for the grill (optional, the grill holes are 4mm):
  https://www.prusa3d.com/product/threaded-inserts-m3-short-100-pcs/
  or
  https://www.aliexpress.com/item/1005002615923810.html
• PETG or ABS
• original rear panel screws
• Glue :)

Print settings:

• Minimum 4 wall
• Minimum 50% infill
• Normal support

Why grill and not holes? The holes greatly weaken the airflow.

I did not test the AMS version, it is not sure if it is compatible with the filament buffer.
If you don't use AMS, it's easier to print the non-AMS version, which I recommend.

Printing, gluing, done :)

Szép napot!