December 4, 2024
Description
Explanation step by step [ENG SUB]:
Print settings :
Layer 0.1mm or 0.2mm - 6 layers top and bottom - 4 layers perimeter - infill 0% (for the ring) infill 50% (for the bases)
IMPORTANT : You should print the ring in WHITE or TRANSPARENT PLA.
Buy all components: https://jeje-linge.fr/en/products/lord-of-the-rings-lamp
Librarie : Adafruit_NeoPixel
License:
Creative Commons — Attribution — Noncommercial
7
Jéjé l'ingé
