IKEA JANSJO USB light holder

The light holder allows for attaching the IKEA JANSJO USB light to a surface using two 10mm printed screws. The screws should go through two 10mm holes in the surface and screw into the thread in the part. The design consists of 2 parts holding the light from both sides.

There are 2 variations of the project included:

1. Simple - small part for holding and mounting the light. USB port sticks out from the bottom.
2. With a light switch - with a 6.2mm hole where a switch can be mounted and a small box where cables can be hidden. The box has a hole at the bottom where the power cable should be routed through.

My printing settings

I've used the following settings and they worked well. It doesn't mean other wouldn't work as well ;)

• External
  • Nozzle: 0.6mm
  • Layer: 0.15mm
  • Infill: 30%
• Internal
  • Nozzle: 0.6mm
  • Layer: 0.3mm
  • Infill: 30%