March 29, 2023
Description
I needed a scoop with these characteristics:
I designed this scoop for a 500g yamamoto creatine (creapure) container. Since many manufacturers use the same containers it can also be used for other brands.
The length is 180mm (approx. 7 inches) and the diameter of the hole for hanging is 7mm (aprox. ¼ of an inch).
No supports are needed, printed in PETG for better elasticity but PLA could also work (20min with my bambulab p1p).
If you have adhesion issues on your bed you may also add a brim in the slicer settings.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11