April 28, 2023
Description
28 April 2023: I will no longer be supporting revisions to this model. You can use it as is, and add negative shapes to fit the dimension of your tape/magnets. I have been so busy that this has fallen off the list of priorities. It's still a good model by itself, and you can add the negative shapes easily in whichever slicer you use.
31 March 2023: Hindsight is 20/20 right? I will be changing the attachment method from magnets to include a small channel so that double-sided foam tape can be used. I hope this is a better idea. Thank you for chiming in, roadshow.
29 March 2023: Please note that the 3 magnet slots are insufficient to support the weight of the sheet holder (even in an empty state). I will be revising the files to have more magnet slots, as well as shave a good chunk of weight off. This means less filament and better results.
__________________________________________________________________________________________________________
I really liked the original design by Glen Waelbers, but when I got around to thinking about it, I don't change the nozzles on my Bambu Lab printers very often. That being said, I didn't want to store them where dust and debris can fall into my nozzles, so I quickly reduced my need to have nozzle storage built into the sheet holder. I decided to store the nozzles in a separate accessory box and leave the scraper out where I need it.
I remixed the design to keep the same overall aesthetic, although nozzle storage and print bed scraper dock are eliminated. I've also added slots in the back to accept 10*3 round magnets, to attach this to the printer and not have to worry about it falling over, or printing some kind of stabilizing feet. I suppose you could also use the recessed channels to install any kind of hardware that you want, in case you'd rather attach it to a wall or something.
License:
Creative Commons — Attribution — Noncommercial
7
ROCKET3D.xyz
