Texas A&M Magnet (captured magnets)

Please like and follow and post your makes.

I printed a Texas A&M magnet from another user and I was not able to use it with only two magnet holes the print was too heavy to hold. 

I decided to make my own design with available artwork online and create four cavities that top out on the color change step.   If sliced appropriately you will be able to insert the four magnets  8x3mm into the cavity when the printer pauses for filament color change to maroon.   A company called Filacube makes a really nice TAMU maroon color.   

The magnets will be captured into the print and will rattle around a bit until up against a metal surface.  

I sliced it at standard settings .2 layer height 10-15% infill .4 nozzle.   My file for the MK3 is attached.    You can scale up and down but you will need appropriately sized magnets.

I have also made a University of Houston magnet.   You can find it here.