Thermometer/Hygrometer 20-20 Extrusion Vertical Holder

I designed this simple vertical (above or below) holder for my Voron v2.4, it uses M3x6mm socket head cap screws and M3 t-nuts. 

Thermometers/Hygrometers were purchased from Amazon here. I recommend setting them all in a box and discarding any which don't match the others after a few hours.

It's easy to install and can be printed easily in the stl orientation without supports. It should be printed in ABS or ASA (if used in a Voron enclosure) and I recommend using enough bottom/top layers and walls to effectively print it solid without infill.

If you need to modify it at all, I've also included the Fusion 360 files. 

Hope it comes in handy for you!