Zenner RTKD water meter proximity adapter

Adapter plate to connect a proximity sensor (tested with LJ18A3-8-Z/BX-5V) to a Zenner RTKD water meter. It allows for a flexible and therefore optimal setup of the proximity sensor.

Two installation options:

• use the included clamps to mount the plate without any additional tools or damage to the meter
• use the plate's holes and compatible screws (maybe use washers) to mount it the the meter's holes

All important information on the water meter (eg. counter, serial) remains visible.

Important notes:

• The clamps need to be printed with a plate adhesion (brim is sufficient)
• All parts except for the sensor mount need to be printed with supports
• You need one small screw to attach the sensor mount to the adapter plate

The mount for the sensor is separated and can easily exchanged with a mount for a different sensor. Feel free to remix!

Disclaimer:

This account is not associated or affiliated with any of the brands featured. All trademarks and copyrights reserved to the original brand holders. No copyright infringement intended.