SV06 & SV06 PLUS Sovol 40W Laser Mount

…Please be sure to hit like & post a make, I'd love to see your prints!

Mount the Sovol 40W laser to your SV06 & SV06 PLUS printers.

You'll need:

4x 6mm M3 cap head bolts

2x 8-10mm M3 cap head bolts

Print laying flat on its largest face with the 4 holes in it. No supports required.

Note: you will obviously loose some X axis travel due to this side mounting, be aware of this. 

Also, be sure to remove the magnetised red plastic guard to home the printer, once you’ve homed the printer & raised the Z axis to the correct height reinstall the red plastic guard before use.