April 1, 2023
Description
Nothing much new here...but...this is an updated version that doesn't fight your printer. The problem with the commonly available model is the little ratchet arm (pawl) has almost no bed contact, frequently comes loose during printing.
In this new version I have added some beef to the tiny feature, giving it greater surface area on the bed. The change does not make any difference for the operation of the tool, but sure does make it more readily printable.
Enjoy
Printer:
COREXY
Rafts:
No
Supports:
No
Resolution:
.2mm layer
Infill:
30 percent or higher
Notes:
I like to print parts like this as COLD as possible, and set the blower to a minimal value, like 15% or so. The colder the plastic, the less it wants to warp and curl.
License:
Creative Commons — Attribution
8
NeilR
