Quick-Out Wall Mount for Sanding Block or Sponge

I made this holder to keep my sanding block easily reachable, because you all know how often you need one when you printed something.

It is 10cm wide and the holding clip flexes nicely. You can stuff things in best that are 3-4cm tall. Like big kitchen sponges or a bunch of 3,5" Floppy Disks - if you still know what that is, of course :-)

Of course, I made it using the MultiClip system so you can choose from a range of pre-made mounting clips to find the best for your needs :-)
In the picture the holder has been stuck to a metal surface using two of the 20mm magnet clips you can find using the above link.

To make FDM printing super easy, this thing prints in two parts that can just be snapped together (using the MultiClip design here, too) after finishing the print.

If you like the MultiClip idea you might want to have a look at some more MultiClip-enabled designs. You are also very welcome to use the MultiClip Templates for your own objects.

Print Settings

Rafts: No
Supports: No
Resolution: 0.15
Infill: 20%