Cover Plate for the Aux Fan and Cable (when you have a transparent sidepanel) or enclosure, like the Minimal Enclosure for der P1P or just no enclosure at all.
The original Plate by SkyGuy is phantastic, but id did not quite fit - it is supposed to be used in combination with the Bambu Lab Aux Fan Saver 2.0 or the Bambu Lab Aux Fan Saver 2.1
What is different:
- it fits the newer Aux Fan Models with the mounting tab better
- it features a screw mount for the Aux Fan mount (you need a few washers though or use a shorter screw, since the original is way to long and would poke out the back)
- the cable guide is shaped a bit differently to give more clearance to the fan duct
- the cable guide has secondary tabs on the other side to prevent the cable from slipping out and one side is a bit deeper than the other
- the cutout under the screw is shaped differently to accomodate the cable turn better
- the “pointy” corners and sharp edges got a fillet or chamfer
suit
