To be honest, I was a bit annoyed that there are so many beer crates for batteries but none of them is customizable the way I'd like it to be. So I created my own, that I'd like to share herewith…
beer crate customizable in
- crate
- color
- number of rows (x)
- number of columns (y)
- wall thickness
- with or without stackability on top
- with or without stackability on bottom
- stackability tolerance
- outer corner radius (z)
- lateral recess
- height above recess (z-position)
- height
- size in % (x and y)
- corner radius
- floor
- height
- with or without grid (holes)
- grid with rectangles or triangles
- triangle wall thickness
- bottle / battery / whatever
- diameter
- height
- grid
- height
- wall thickness in x-direction
- wall thickness in y-direction
- conical or not
- top diameter of glas (bottom of crate)
- logos from svg
- with or without logo in x-direction
- with or without logo in x-direction
- color
- filepath x-direction
- filepath y-direction
- logo positive or negative from wall
- height (positive or negative)
- z-angle in x-direction
- z-angle in y-direction
- size in x-direction
- size in y-direction
- text
- with or without text in x-direction
- with or without text in x-direction
- color
- text x-direction
- text y-direction
- text positive or negative from wall
- height (positive or negative)
- z-angle in x-direction
- z-angle in y-direction
- size in x-direction
- size in y-direction
- aso.
All comments currently in German. Please message me if you cannot find translation.
Updates
- 03.04.2023: corrected minor mistakes in scad-file
- 03.04.2023: added possibility to adjust z-angle for higher texts and logos
- 14.05.2023: possibility to make conical fitting (especially for glasses) at bottom part of crate (see Gabriel glas stl-file)
beinaendi
