Coleman 100qt 5 Day cooler Lid Prop

A wedge I made to keep the cooler lid open while filling the cooler. It was made for a Coleman 100qt, 5-day cooler, but it's pretty universal and should fit many different styles,

printed with 20% infill, no supports, standard settings.

I designed it so that the thinner straight piece goes into the cooler and the wedge on the backside. It's designed this way so if you forget to remove it, it should pop out before a hinge breaks.

It can be used on the backside of the cooler and will hold the lid open while you fill the cooler. It can also be moved to the front of the cooler if you need to hold the lid cracked open, so it dries out after use.