Multi tablet and phone stand

As we are 5 in our family we have a lot of mobile devices. We also have a dedicated space for storing and charging these devices ... I wanted to make something to be able to declutter this space by organising the way our mobile devices are stored. This seemed to do the trick. It houses 7 devices and 16 cables at once.

Timelapse of the print can be found at https://youtu.be/AXsV2rcf3Pc

Print instructions

Print on its side and across the print bed ... if you have a Prusa i3Mk3 like me ... if you have a bigger or smaller print bed ... choose the best orientation or even cut one of the cable-holders.

There is one version that has supports built in (between the cable-holders). These were designed for 0.2mm layer height. If you want to print faster (larger layer heights) you could use the version without support and put in your own supports.

Mine was printed in white PLA (RepRap World white PLA) and it is nice and flexible but not too flexible ... just the right amount.