Da Vinci Jr Long Hole Plugs

Imported from Thingiverse

Remix of Odiums_Champion's long dust plug, which is in turn a remix of RYANMAC1911's shorter dust plugs.

I created two files here to suit different types of people.

Half Single Plug is for people like me. Lazy people. I cba to be taking out the tubing all the time, but still wanted to prevent at least a little dust from entering the printer, so this covers half the slot.

Half Double Plug (print twice) is for the same purpose as Odiums' design, but slightly updated. This is for when you want to take the tubing out to fully seal up the hole from dust.

Print Settings

Printer Brand:

XYZprinting

Printer: 

da Vinci Jr. 2.0 Mix

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

10%

Filament: LABISTS (cheap ass stuff) PLA White

Notes:

Actually printed on a Da Vinci Jr 1.0w but it wasn't listed as a model :)

How I Designed This ===================

Haven't you just copied Odiums' Exact Design?

No! But I see how it may look that way! I've copied the idea completely, hence this being a remix :)rnrnMy understanding of Odiums' design is that the original by RYAN was copied and pasted in line to get the right length, then it was made a little narrower to fit the gap properly.rnrnThis leaves circles that can be seen in your slicer, and it seemed to take longer to print because of this.

So What's Different?

Well, I took RYAN's original design, cut off the ends and separated them from the body.rnrnThen I stretched the body and reattached the ends, making it a three piece design rather than the same object repeated over and over, thus eliminating the circle marks.rnrnAlso, it allowed me to create another design for lazy people like me, with a rounded end rather than a flat side.rnrn

Category: 3D Printer Accessories