Pen Holder - Loadout

Background:

I'm a product designer and in my day to day I carry three pens in my bag at all times: a .05 Micron, a Sharpie, and a Copic Classic. With these pens you can draw almost anything at a moments notice. The issue was they took up too much space in the bag and I needed them to be more accessible. I tried a lot of variations in the design and this was the final one that I decided served all functions and features best for these pens. Comment what pens/clip sizes you want to see so I can make more variations to fit your needs!

Specs and Printing:

The clips are built for 20.5mm x 1.2mm webbing, this was on my Arc'teryx Mantis 1 bag but other bags will work too. 

I recommend printing in TPU since this part needs both flexibility and for durability of the clasp motion. 

This model was prototyped and printed in 95A TPU from Sainsmart at .28mm draft quality. The top and bottom are printed at 20% and the bridge is printed at 100% for rigidity. 

I have tested the top and bottom with as high as 100% infill and the clasps still work but are much more stiff.