JerryRigEverything Knife box with lid (Gridfinity & portable)

This is a remix of 'Loss of signal's' "JerryRigEverything Box cutter - Gridfinity" model. 
I added

• a little design to the lower left corner of the model
• a lid to close the compartment
• a version without the gridfinity feet for "improved" portability (I prefer a smooth surface for portable containers)
• inserts for 5x5x5mm magnets so the lid stays on

I wanted a nice enclusore for the knife & blades and stumbled upon Loss of signal's model but needed something more portable I can just throw in my backpack.

So I mainly focused on making a lid (that is held in place by spare magnets I had) and tiddying up the surface with a fitting design. I removed the griidfinity feet for my purposes, as I currently do not have a gridfinity set planned and just want to throw the knife into my bag. 
But to not lose any functionality of the original design, I also made a variant with the gridfinity feet left untouched.

I printed my parts with PLA and no special settings. Supports are not needed.

To add 5x5x5mm magnets you'll need to prevent supports with in the cavities on the four corners of the box & lid and pause the print at the last layer where you can access the caveties.