Pac-Man earrings

Simple earrings inspired by the Pac-Man game.

Print instructions

If you slice the models on your own, the layer height must be thinner than 0.20 mm. You can use any filament for printing. You have to finish earrings yourself.

For one pair of earrings you need: printed models, two small pliers, two jump rings, two earring hooks

Completion:

1. Use pliers to open jump ring.
2. Put a printed model and a earring hook on the jump ring.
3. Use pliers to close the jump ring.
4. Repeat this procedure for second model.

The last photo shows the layout of models in the gcode file.