Triple Ring Rope Spanner / Rope Tensioner

NOT FOR PERSONAL SAFETY / CLIMBING (I don't know if this sentence is neccessary because this should be clear ;-))

This is a rope spanner / tensioner for 8mm ropes. 

It should be as simple as possible to mount/remove the rope.

Update V2.0 - Is better for the rope. In V1.0, the rope clamps itself on the bottom a bit. It's not that bad, but because of that, I made a second version.

Why You should use this model?

Because it's simple to use

1. Knot it at the end of a rope
2. Swing it around a pole
3. Pull the rope through the middle ring
4. Lift it over the third ring

Print Instructions

I used 0.4mm layer height with 0.6mm nozzle and about 15% Infill

For outdoor use and durability I will use Pursament ASA or PETG.