April 8, 2023
Description
Fits a 3010 (30mm x 10mm) 12V fan to the vent slats around the controller board.
Useful for providing a bit of air flow around the X & Z motors as well as the controller borad.
NB: It's a little tight (fan rubs a bit) so consider this a work in progress.
Screws used are M3x8mm self tapping screws. Really should have been longer, but longest suitable screws I had at hand (screw heads need to be wide enough to not go through slot).
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
aibohphobia
