Wrench Holder

I found that "Tymbo13's" holder, remixed by "Jvince" was the best wrench holder out there for my needs. Jvince's added the white lettering, which is really useful, and looks great. However, I (unfortunately) don't own an Prusa MM 2. I tried glueing the letters in place, but because his emboss was shallow, the letters didn't want to easily fit into the recess.

So, I re-drew everything, deepening the emboss, as well as scaling the text down slightly. Even scaled smaller, not every number drops right in, but it's good enough that it allows the letters to align easily.

After printing everything, I sparingly put a bit of C.A. (super) glue in the text recess using a toothpick. I picked up each number by stabbing it with the tip of an X-acto knife, and then placed it in the recess. I used the blunt edge of the blade to press it into place. As I said, not all the numbers are going to sit perfectly flush, but they align nicely, and the glue has held everything well.

I included a recess for a magnet, but the weight of the wrenches really make it unnecessary.