Hashtag design for watch

This is a fancy hashtag design for this watch.

Print instructions

To build this watch you'll need all the parts from the original watch. (except of _spacerring.stl and _dial_innerhousing.stl)

The ring and the watch face (inner housing) are set up right in the .3mf files already. Just set your printer and your desired filaments and you are good to go.

To get the strips onto the watch band of your size do the following:

1. Find the right size and download the xxxmm_watch....stl file e.g. _170mm_watch_20191012-100259-90ym1u.stl_
2. open the file 140mm_watch_hashtag.3mf
3. right click on the part -> add part -> load
4. load the file you downloaded before
5. you should find the band with your size now in the browser on the right side
6. click on the 140mm.... and press the delete key on your keyboard
7. choose the desired color for the band and slice that thing!

The result should look like this: