Nintendo Switch Game Card Holder

A Nintendo Switch game cartridge holder. It will work on Switch original and Switch 2 games since they use the same size cartridges. The case uses a print in place hinge, do not separate the top and bottom.

There are several sizes available, the name indicates how many slots there are in the x and y axes:

• 1x2

• 2x2

• 3x3

• 3x4

• 3x5

• 3x6

• 4x4

• 4x5

The 1x2 file will also work as a quick test to see if a bigger one will print OK and check tolerances on the hinge and the card holders.

The game cartridges are held on by hooks that are printed separately and inserted into their slots on the cartridge holders. If possible print the hooks in PETG or ABS/ASA. PLA has a tendency to creep and the hooks will not hold the cartridges for long.

You will need to print 2 hooks for each cartridge holder the case you download has (print a few more than necessary, in case one breaks when inserting). A bit of force is required to slot the hooks in their places, a bit of flexibility is needed in the material to allow the hook to bend. If they are too tight to be correctly slotted try printing them a bit smaller.