April 19, 2023
Description
I needed a decent case for the recent edition of gm328, but did not want to fiddle with screws. Found a good model by machanzar and tweaked it slightly.
It should not require any screws now and works with a friction fit. Worst case scenario - add a few drops of super glue and you are good.
I've also added a cutout on the side, for the flat components testing.
Rotary knob is 6mm so just print whatever works for you. I've used a shortened version of this one for the picture.
License:
Creative Commons — Attribution — Noncommercial
9
kolba
