100g Mini Spool Screw

Use it with the 100g mini spool!

Want to get the filament onto the spool quickly? Just grab your electric screwdriver and follow the instructions:

1. Take your 100g mini spool. Look for the vertical line mark.
2. Take the screw part with the hexagon pin
3. Turn it so the two vertical line marks match up and put in throw the spool hole
4. Put the other screw part on from the other side (smaller ring goes inside the spool hole)
5. Attach it to your electric screwdriver
6. Rewind the filament :)

I recomment printing this with “strength” settings (at least 5 walls, 30% infill, PETG) so it can withstand the torture of the electric screwdriver.