Bambulab CapHolder Hotend Exchange X1C

A small fixture to fix the Cover during the exchange of the HotEnd 
-   No more annyoing during change of  noozle 
And also put no stress on smd plugs, cables pins, .. 
Easy to print , need only 2 M4 bolt,  fixing is done by Slot and magnet

It s also holding the tool for plug out the cables from Hot end of the PCB. So

Just push it in the carbon tube - it snapping easily 
and no, really  no damage, the tubes are in carbon (for x1c)  PLA/PETG/ABS are much more weak  so no worry ;)

Note : for the P1P it  looks like that the cable are shorter  than on X1C . Following Bill MaQuerry, he prints it mirroired so it can be use on the right side 

note: 
the Hotend plug removal tool for Bambu Labs X1 printer is not from me : research for it
 it s done by Mrfixit