A photogrammetry model of a rabbit statue, mounted onto a baseplate.
To print:
- Infill 15%
- 0.4mm recommended (but I printed mine in 0.6mm nozzle, and it managed it alright)
- PLA / PETG / any hard plastics
- 0.1mm layer height
- 2 perimeters works well (3 otherwise)
- Tree / Organic Supports ideal
- In Cura / PrusaSlicer, block supports underneath the chin and belly of the rabbit, as shown in the screenshot.
- There should only be one tree/organic supports for each of the ears
Specs:
- X and Y width: 35mm
- Z height: 37mm
Printed in SunLu Silk Magic PLA (Green / Blue)
ryanba
