Steam Deck Secure MicroSD Card Holder (6 Slots)

#1 of Gamerant's “10 Free 3D-Printed Steam Deck Accessories to Check Out”

https://gamerant.com/best-free-3d-printed-steam-deck-accessories/#secure-microsd-card-holder-6-slots

A quick and easy to print microSD card holder for the Steam Deck. This version holds 6 cards*  so you can keep your Steam library with you at all times. Each slot has a small arm which latches into the notch on the side of microSD cards--keeping those pricey cards safe.

Features

• Secured by lacing the ribbon built into the Deck carrying case through the eyelets on either end.
• Each microSD card is secured by an arm that catches in the card notch--ensuring it won't fall out. (Added bonus: it makes a satisfying “click” when engaged!)
• Sits underneath the Deck and will not scratch the screen.
• Does not require any adhesives/velcro/etc.
• Prints in ~16 minutes.
• Uses ~2g of filament!
• Inspired by Felix Wagner's design (https://www.thingiverse.com/fewfew/designs) for a “clicky” microSD card holder slot.

Recommended Settings

• Walls: 3
• Layer Height: 0.20 mm ← IMPORTANT: the tolerances are designed for 0.20 layer height.
• Material: PLA for most uses
• Supports: No
• Change Orientation: No

* Just send me a message if you need a different number of slots.