Double Sink Basket

See my V2 for this model here: https://www.printables.com/model/763099-v2-double-sink-basket
 

I grew tired of the style with suction cups that would never stay attached to the wall of my double sink.  Designed this to fit over the center divider.

Print settings:

0.3mm layer height

PETG due to the exposure to hot water.  Recommend a different color than white.

Print the mount on its side, no support required

Print the basket on the bottom with only supports enforced for the notch that attaches to the mount.  Printer should be able to easily bridge in the other gaps.

3 perimeters

60% infill