April 11, 2023
Description
This is a bottomless hide for reptiles, like a snake.
Made from an original photogrammetry rock model created by KlessGyzen.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
.28mm
Infill:
25%
Filament: Priline PLA Grey
Notes:
I recommend printing without supports if your printer can at least print without making spaghetti. The inside will be ugly, but hit it with a propane torch or heat gun to smooth it out. The critter won't care!
Made with 3D builder, hollowed out original model, then added entrance.
Category: PetsLicense:
Creative Commons — Attribution
brandorf
