KRG Bravo Buttstock weights

Small molds for adding weight to a KRG Bravo stock in the buttstock area.

There are different items.

One goes in the under either the flat cover, or the Hook style cover that is on the bottom of the stock and accessed by a single screw.

Print these part with very thin walls (I used 2) and 0 top layers. Also, you must use 0 infill.

The goal is to have an empty mold that you can fill with whatever heavy objects you like to add weight to the stock. You can then seal it with epoxy, tape, etc and put it in your stock.

This is an alternative to gluing weights in permanently; as you can now make little weights that should be easy to remove if you don't like it, or if your setup changes in the future.

You might have to put foam, tape, bit of hot glue, an o-ring, or something else to your liking to keep them from rattling.

Check out https://www.thingiverse.com/thing:5235888 for a pistol grip weight also.

Print Settings

Printer:

Voxelab Aquilla

Rafts:

Supports:

No

Notes:

Category: Sport & Outdoors