non-MMU print-in-place dishwasher sign clean/dirty

Just a non-MMU remix of Printschnitzel.at's "print-in-place dishwasher sign clean/dirty". 

I printed the model at 130% scale due to I thought the model looked a little small.

The signs clean/dirty has the letters slightly recessed so you can use a fine tipped marker to colour in the letters.

I have also edited the unbinding key to be flat on the bottom so it is easier to bang the key on a flat surface (I insert the key and hammer down on the print with a mallet).

Their are two versions of the file which is “Magnets” the same as the original file where their is a gap for inlaid magnets with size 9.6x24x2.1mm. And their is “No_Magnets” which just removes that gap and replaces it with infill that slightly decreases print time.