Handle for Samsung Fridge Door

UPDATE 27.11.2023
In daily use, the way I opened my fridge,  there was a slight stress in the direction against the curve of the handle, which lead the handle to break at the narrowest part. Thus - in a quick and dirty manor - I added some ridges to the bottom and top to give some more sturdiness to the handle, so it can manage the stress at these narrow parts.

A second handle v.1 on another fridge, where forces only pull in the direction of the curve, still works flawlessly without any sign of weakness.

---------------------------------------------------

The Samsung RL38T775CS9/EG Fridge-Freezer-Combo  has only recessed handles in the horizontal gap of the doors. 

At my height it is uncomfortable to bow down to the handle groove every time to open the door, so I remixed a fridge handle to fit my model, to be attached at a more convenient height. Double sided adhesive tape should hold the handle in place.

Sliced in Cura 5.2.2
Printed it upright in 3DJake ecoPLA filament at
- 0,2 mm layer height
- 40 mm/s
- 10 % Gyroid infill
with support