Adalit L-30 wall mount

The Idea

We are using Adalit L-30 helmet torches in the fire department. Since these are in a pool and everyone can take one or change it for a charged one, we have a table with chargers on it and several spare torches on it. The problem now was to identify the charged ones from those that still need to be charged. Also I did not like the way the torches were just laying around.

Print instructions

Since the torches are not the lightest and handling is not done with the greatest care, I recommend a sturdier setting to print the mounts. Ours are used inside so PLA will do just fine. 

Files and mounting instructions

The little wall mount can be screwed onto wherever you like using M3 screws with angled head. We used regular SPAX wood screws. 

👍LIKE👍 + 💬SHARE💬 + ⚒post your MAKE🛠

Please leave a like and share your experience with this design. Let me know if I can improve on it and redesign it. There is always a better version. Also show us your make!

Also see my other designs here.

Highest version number is the most recent.