June 18, 2023
Description
Just a storage solution for my Molotow Acrylic Pens that I like to paint my PETG Prints with. The box can be used with or without the base in horizontal or upright orientation (see pictures).
20 Molotow One4All pens (diameter 13mm) fit in one box. When stacking upon each other there are pegs and holes that hold the upper box in position.
The beveled base is nice for desktop placement.
There are two versions of the base:
V1 has negative text at the front. I printed it with the text side facing down to the build plate with supports enabled. The supports are not meant to be removed and give the text a nice texture.
V2 has positively extruded text on the front and should be printed with the bottom plane sitting on the print bed, just in the position you will later use it on the desk.
You may put some rubber feet unter the base or the first box (when not using the base). I like to use those round, transparent ones 10x1mm like this ones from Amazon:
Printed in PETG (my favorite material).
Developed with Shapr3d (like all my designs).
The colored text is painted with the Molotow markers, no MMU print. That’s what those markers are made for.
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Clamikra
