April 13, 2023
Description
The Cisco WS-CAC-3000W is a very powerful 42V volt power supply which can be bought very cheaply on ebay as NOS or used.
Since it was meant to be mounted inside the custom Cisco hardware, it doesn't sit flush on a surface because the front panel is larger than the body. In order to have it sit straight on the workbench (or below it or anywhere else), you can print these feet.
The rear part is just a friction fit around the housing, you might want to add a blob of Super Glue if it doesn't have a tight fit (depends on the accuracy of the print). You can use a zip tie to tie the cable to the rear, so it doesn't flop around on the workspace.
(The rear part was changed from 20mm to 10mm in the files, the pictures show the 20mm version. But that thickness is not required and just wastes filament.)
The front part sits on two mounting pegs and adds a little bit of friction for the On-Off-Switch. You can add a blob of Super Glue as well, if it doesn't sit tight enough.
If you like this model and find it useful, consider adding a like and posting a make :)
License:
Creative Commons — Attribution — Share Alike
8
crasbe
