Print in place Bag Clip

Print in place, organic support recommended but not necessary (for the area around the hinge). Choose your lenght and print it with any setting you like. 
0.3 layer hight and 4 perimeters with a 0.4 nozzle worked fine for me.

These lenghts are available:

50mm
75mm
100mm
130mm
175mm
200mm
250mm
300mm

Note: The lenght refers to the area in which you can put your bag in and does not include the hinge and latch part. These add ~23mm to every clip.
The little material bridge between one leg and the latch is there to prevent warping if bed adhesion is a little off or cooling is not sufficient. It rips away and disapears on first use, so dont worry

I tried Bike Cyclist's well designed and tested bag clip but wanted to add a hole in the hinge to hang some little bags of spice into my kitchen, like you see sometimes done with garlic. In the end i did no remix but made a new design with the features and design i wanted. The latch part however is in its function basicly identical to Bike Cyclist's clip.