Bambu AMS drawer Stand

Slowly tap into the interference fit with a wooden hammer. I printed in PLA, not ABS, it warps. I have uploaded my parts and location for your reference. I increased the padding of the handle, 15% is too small. I already broke one, 45% filled reprint. Do not mistake the installation direction, it is difficult to disassemble after installation. Turn off "Flow Calibration" when printing as it will affect the printed part.
If you're going to put it on top of the printer，don't print first, I am designingplaced on the printer, testing and uploading. I originally designed this to sit on a desk. If placed on the printer, it will interfere with the screen and cover handle.

This version is an early design and I recommend printing the version below.

on the printer：

https://www.printables.com/model/465919-put-on-the-printer-bambu-ams-drawer-stand