Bambu Lab Purge Bucket - Vase Mode - Parametric

Here is yet another purge bucket for the Bambu Lab series printers.  This one I designed to be printed in vase mode for super clean printing, no z-seam lines and uniform wall sheen/shine (using settings below).  The 75mm depth requires one to sandwich the purge bucket between the printed and a wall to act as a backstop.  The 150mm depth STL should be deep enough to use without a wall to act as a back stop and have extra volume for multi-color prints.

It is also parametric if you need a deeper or narrower version using Fusion 360 and opening the parameters dialog and changing the Depth user variable.

Print Settings (0.6mm nozzle recommended)

0.6mm Nozzle

• Spiral Vase Mode Enabled
• 0.25mm Layer Height
• Outer Wall Line Width = 1.499mm
• Inner Wall Line Width = 1.499mm
• 1 Wall Loop
• 0 Top Layers
• 6 Bottom Layers
• 50mm/s Outer Wall Speed
• 2500mm/s2 Outer Wall Acceleration
• Brim ONLY if required

0.4mm Nozzle

• 0.6mm nozzle recommended so it is more durable/stiffer but it can be printed but should be handled with care
• Spiral Vase Mode Enabled
• 0.20mm Layer Height
• Outer Wall Line Width = 0.999mm
• Inner Wall Line Width = 0.999mm
• 1 Wall Loop
• 0 Top Layers
• 5 Bottom Layers
• 50mm/s Outer Wall Speed
• 2500mm/s2 Outer Wall Acceleration
• Brim ONLY if required