Suzuki Jimny Cup holder V2

Cup holder for a JB74 Suzuki Jimny. It mounts in front of the air vent on the drivers side (RHD model). Mounts with one M8x 25mm allen head bolt. Simply remove the stock cover “bolt" and screw in the real bolt.

Printed upside down with supports from PETG. When using super slicer by default it wants to put supports in the vent holes. Its worth taking the time to not support the vent holes as it makes support removal very difficult and with the new rounded hole it doesn't need it.   

Updates: Rounded vent holes so support isn't needed there. Also added a left hand side model to match the other one. I printed the at 60% infill because I found over time the PETG around the bolt hole will deform and make the bolt loose.