A small funnel for filling vaporizer 16mm stems, filling doob tubes, or as a stand. The overhang is designed for 16mm outer diameter and 14mm inner diameter, which fits Tinymight stems perfectly.
Extra Details
- Modeled in Fusion 360
- Tested on Bambu X1C with PLA and PETG
- Suggested settings
- 100% infill
- 0.12 layer height
- 0.15 first layer height
- seam aligned
- Uses 4.66g filament
- I suggest lightly sanding with fine grit sandpaper to smooth out the inside of the cone, but don't sand the bottom of the funnel, the print lines provide a little friction that keeps the funnel in place nicely
hellgiver
