USB cable organizer (screw mount or use command strips) - Muliple Sizes (REMIX for both thin and regular cables))

This is a Remix of my USB cable organizer meant to be wall mounted. 

This version is designed to support both normal sized and also thinner USB cables (in different slots), with holes that are 4mm wide and some that are 5mm wide.  Similar to the original models, there are several sizes and ways to mount them.

The 3 slot version has two slots for thin cables and one for normal USB cables.

The 4 slot version has two slots for thin cables and two for normal USB cables.

If you want the 6 slot version with two slots for thin cables, you can find that one here.

There are 3 versions which have different wall mounting options:

• The first has “PLAIN” in the filename, and can be mounted with double sided tape.
• The 2nd design has “CM” in the filename, for use with 3M command strips, it has a small cut out on the side to help with removing the command strip.
• The final has “SCREWS” in the filename, and uses screws. The screw holes are designed for a #8 screw. 

I printed it in the tall orientation which requires minimal supports. Seems to work fine for the cables I have on hand.

If you need a version to support thinner, or a mix of cables, check these out:

6, 4 and 3 slot versions which support thin USB cables.

4 and 3 slot versions, which support normal USB cables.

6 slot versions which support thin and normal USB cables.

STEP file is included for easy remixing.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables to see what new stuff I post.  Thanks for looking!

How I Designed This

This was designed with ViaCAD V12 Pro