Solder Webcam Lamp

New design, have yet to print it. 

It's too big for my S1 Pro bed laying flat.  This one has to be printed vertically which is why I gave the mount a large base to add a brim and supports to. This is a full volume print so ensure your printer is capable of large prints before tackling something like this.

Recommend printing the light diffuser in clear PLA or PETG. It's thick so by the time it finishes it will likely be white translucent instead of clear. Recommend very low infill or no infill on the diffuser to allow the most light to come through. The diffuser snap fits into the lamp bezel.

The fume extractor coupling is designed for the Kotto Fume Extractor available on Amazon.

The webcam light with articulating arm is something I got from Amazon. They are very popular for webcam lamps but they fall short as a “top down” workbench webcam lamp. Attaches with standard camera ¼"-20 screw threads. 

Recommend you get a ¼"-20 tap to create the threads. The fine pitch of the threads never prints correctly out of the box, requires tapping.

There is a hidden vacuum chamber (pipe shaped) inside that sweeps around the circle internally. MAKE SURE YOUR SUPPORT MATERIAL DOESN'T FILL IN THE INTERNAL VACUUM CAVITY! As there is no way to remove it once it's in there.

Fume extractor, lamp, and webcam mount all-in-one.  For people who like to record/stream their workbench projects.